LTS120E-P ELECTRICAL & PROBE SYSTEM
Temperature and environmental control from -40°C to 120°C
This system is based on the Peltier technology used in the LTS120 heating and freezing stage, with similar temperature control and range. The dynamic heating and cooling performance ensures a wide range of electrical component temperature control applications can be performed. Use the LTS120E-P stage to control temperature between -25°C and 120°C (or -40°C with a cryo-cooler).
For an extended range up to 420°C, please take a look at the LTS420E-PL8/PB4 stages.
Up to 8 positional tungsten probes can be connected to the electrical connectors within the sample chamber and enable the user to make electrical measurements on the sample, while at the same time accurately controlling the temperature.
The stage body has gas valves to enable gas purging of the sample environment.
The stage consists of a large area (40mm x 40mm) temperature controlled element with a platinum resistor sensor embedded close to the surface for accurate temperature measurements. The sample is placed on the heating element and the probes moved manually to make contact at the appropriate points.
Lemo connectors are supplied as standard, but BNC can also be used.
